Nitrogen Booster Station NBS
The Leutert Nitrogen Booster Station is used to compress nitrogen into the sample chambers of the one phase™ samplers and cylinders to a pressure rate above the well pressure. The sample chambers are pressurized across a piston with a nitrogen gas chamber. This compensates any temperature induced pressure drop (e.g. as the sample is returned to surface).
The booster is driven by compressed air. The output pressure is controlled by an adjustable pressure regulator with build-in filter/water separator. The cycle speed of the booster is controlled by a ball valve. A build-in bleed valve is used to release the pressure. The supply pressure of the air driven booster, the pressure in the bottle and the pressure at the high pressure side can be monitored by liquid filled pressure gauges.
A storage compartment for the hoses is also provided.
| Type | DLE 75-1-2-GU-614 (4H) |
| Pressure ratio | 1:150 |
| Outlet Pressure max. | 1,050 bar |
| Process fluid | Nitrogen |
| Flow max. | depending on application |
| Air pressure drive | min. 1 bar / max. 7 bar |
| Max. drive pressure PS | 10 bar |
| Max. operating pressure PS | 1,300 bar |
| Operating temperature TS | -20 °C to 60 °C |
| Dimension (W x D x H) | 650 mm x 260 mm x 410 mm |
| Weight | 34 kg |
Connection values |
|
| Drive fluid inlet (PL) | 1/2” G / BSPf |
| Primary pressure inlet (A) | 1/4” NPTi |
| Pressure outlet (P) | 7/16 - 20 UNFi |
Airborne noise emission |
|
| Must be analyzed in the system as a whole. | |
